Contents

We decided to take a lighter look TEOTWAWKI with a Survival Cache original,  Murphy’s Laws of TEOTWAWKI.   If you know Murphy then you know, if it can happen…. .

Murphys Laws of TEOTWAWKI

Murphys Laws of TEOTWAWKIWe decided to take a lighter look TEOTWAWKI with a Survival Cache original,  Murphy’s Laws of TEOTWAWKI.  If you know Murphy then you know, if it can happen…..it will. Quick Navigation Murphy’s Laws of TEOTWAWKI Please add your Murphy’s Laws of TEOTWAWKI to the comments below. Murphy’s Laws of TEOTWAWKI From Wikipedia: Murphy’s Law is an adage that is typically stated as: “Anything that can go wrong, will go wrong”. 1.  Food, you still don’t have enough 2.  People without back up shelters might be without shelter 3.  People with guns and no food are finding out that people with food have guns too 4.  Look hungry, they might leave you alone. 5.  Seed bank, the new source of wealth 6.  Insects, It’s what’s for dinner 7.  Gun shots, they attract unwanted attention 8.  Ask everyone if they have food or water, Jedi mind tricks might work on desperate people 9. Wood burning stoves, they are like pots of gold 10.  The less people you know, the better off you are 11.  Mormons, suddenly they have a lot of new friends 12.  Friendly hungry people…..aren’t 13.  People who thought they could make it with just a survival knife are finding out they can’t 14.  Satellite Dishes, they make great family dinner tables 15.  If invited to a dinner party and you can’t figure out what’s on the menu, it’s you 16.  Houses full of food attract the unwanted envy of hungry people 17.  Friends who show up without food are not good friends 18.  Electricity, the good old days 19.  Dog Food, who knew 20.  Cash, its a great way to start a fire 21.  Alternative energy, you’re kicking yourself now for not investing in it 22.  Watching your garden grow, the new Sunday afternoon sport 23.  The Government, it will feed itself first 24.  Large groups of people with guns make the rules 25.  Bad water & Montezuma’s Revenge , they have come to America 26.  People who thought the Government would save them, found out that it didn’t 27.  Hospitals, no longer a place of healing 28. EMP , now everyone knows what it means 29.  Sandy dry soil, suddenly not such a cool place to live anymore 30.  If food is the new currency then fresh water is a hot commodity 31. Gold coins , they don’t taste very good 32.  Toilet paper, should have bought more of that stuff 33. Ham radio operators , who are the nerds now? 34.  Burning Green Wood = Smoke / Smoke = Attention / Attention = Bad 35.  Trying to start a fire with two sticks?  Should have stocked up on more matches Please add your Murphy’s Laws of TEOTWAWKI to the comments below. Save Other interesting articles: SHTF vs TEOTWAWKI? Guide for 2020 10 Ways to Improve Your TEOTWAWKI Survival Fitness

Best M4 Lower Receivers of 2020 Complete Guide for Buyers

Best M4 Lower Receivers of 2020  Complete Guide for Buyers

If you’re building your own M4, you already know how important it is to find the right lower receiver for your carbine. This is arguably one of the most vital parts of any build, as it can affect everything else on the gun. Check out this guide for some great advice on the different types of lower receivers available for purchase, along with some recommendations for excellent receivers that we really enjoy for our carbine builds. At a Glance: Our Top Picks for M4 Lower Receivers OUR TOP PICK: Aero Precision Stripped Lower Receiver Brownells Lower Receiver PSA MOE EPT Lower, Black Brownells "Stripped Lower Receiver" Aero Precision Lower Receivers 5.56mm Comparison of the Best M4 Lower Receivers IMAGE PRODUCT Our Top Pick Aero Precision Stripped Lower Receiver Finish: Black Best Overall Designed for: 5.56 NATO rounds View Latest PriceRead Customer Reviews "Brownells Lower Receiver" Designed for: 5.56 standard rounds Finish: Matte black Best for the Money "View Latest Price" → "Read Customer Reviews" PSA MOE EPT Lower, Black Finish: Nickel Good for: multiple calibers of rounds Comes with high-quality Magpul MOE grip and stock View Latest PriceRead Customer Reviews Brownells Stripped Lower Receiver Finish: Black Designed for: 5.56 NATO rounds Designed to match authentic HK416 construction View Latest PriceRead Customer Reviews Aero "Precision Lower Receivers" 5.56mm Finish: Black Designed for: 5.56 rounds Constructed from extra-strong T6 Aluminum and built to last View Latest PriceRead Customer Reviews Types of M4 Lower Receivers Before we get into the details, let’s discuss the major types of M4 lower receivers you might find. These will affect how your weapon works, so it’s important to know what distinguishes them from one another. Forged Lower Receiver These are the most common lower receivers you’ll find on the market. They’re generally considered to be strong and well-priced. Forged lower receivers are made through an involved heat-hammering process that results in most products coming from a few manufacturers, which are then distributed by numerous vendors. Most forged lower receivers are similar to one another and are generally dependable. Billet Lower Receiver These are made from aluminum billets and are made painstakingly to ensure quality and precision goes into the construction. Because of the time and labor required, these tend to be a bit more expensive than forged lower receivers. These receivers can offer more customization and allow you to tweak your receiver’s performance more than a standard forged lower receiver. Source Polymer Lower Receiver These are made from injection molding processes with hardened polymer resins. Bolstering may be added as the resin solidifies in the shape of the receiver to improve the piece’s strength and durability. This results in a lighter type of receiver than many competitor models and a cheaper one for you, the buyer, since the materials used in construction don’t usually cost very much for the manufacturer. 80% Lower Receiver These receivers aren’t technically considered to be a firearm by regulations from the NICS or FFL, so you can order these whenever you like without having to go through an inspection. These receivers do need more involved tools to install in your carbine than other types, such as a drill press or router. If you’re building a rifle from scratch and have the know-how, this might be a good pick for you. What Makes a Great M4 Lower Receiver? When you’re picking out your lower receiver, make sure to keep these factors in mind. Choosing a receiver that isn’t right for your carbine can lead to wasted time and money on your end, so take the extra minute now and remember these considerations. Type As we discussed above, the type of receiver can affect the durability or weight of your receiver, as well as overall cost. Try to determine which type you’ll go after first before you start shopping. Performance Features These are things like tension screws or flared magwells ( magazine wells ) that can affect your weapon's performance and lifespan. If you've got any key things you want to be included in your carbine, think of them now so you can eliminate receivers that don't have those features. M4 ( Source ) Material Always try to find a receiver that has the durability or weight you prefer. If you plan to fire a lot of rounds, perhaps lean towards heavier or more durable materials that will make your rifle heavier but last longer. Quality Control Finally, look for a receiver made from a trusted, well-vetted manufacturer that has a customer base that trusts their work. You can always look at reviews for details. Quick Take - The Best M4 Lower Receivers These are our top recommendations for the best M4 lower receivers: Aero Precision Stripped Lower Receiver Brownells Lower Receiver PSA MOE EPT Lower, Black Review of the Best M4 Lower Receivers Now that we’ve got all the preparatory information covered, we can start to check out some the best M4 lower receivers on the market. Even if these don’t quite fit the build you have in mind, they’ll be great starting points for searching for the ideal lower receiver for your weapon. Best Overall: ​ Aero Precision Stripped Lower Receiver CHECK LATEST PRICE Pros Made to military specs Has Safe/Semi/Burst selector markings Cons Not great for customization or individual expression This is a fantastic lower receiver that is a perfect fit for the vast majority of gun builds. Since it’s made to military standards, you can rest assured of the receiver’s quality and durability under fire. This means that it’s going to fit most people’s M4 templates, but that it also isn’t the best for custom builds that eschew some traditional construction methods. As far as standard lower receivers go, this is an affordable and reliable piece. It’s made from aluminum in the billet style, so the affordable price is doubly good to see here. You’re getting assured durability and reliability because each piece of the lower receiver was made slowly and to perfection. There are some great markings for your firing setting selector: safe, semi-automatic, or burst. Since these are already engraved you won’t have to finish that touch yourself. The entire receiver is finished with a matte black color that elicits authenticity and military ruggedness. This receiver is as close to the military-issue M4 rifle as you can get without purchasing the real thing as a whole piece. This makes it a great choice for collectors or if you’re reserve or active military and want to replicate the feel of your original rifle that you used during your service years. Bottom Line This is a well-built receiver that’s made to last and whose every bolt was crafted to perfection. It’s made in the military style to adhere as closely as possible to normal M4 templates and has markings for your various firing settings. Best for the Money: ​ Brownells Lower Receiver CHECK LATEST PRICE Pros Starts as aluminum for lighter weight Great for a versatile number of build styles Cons Lacks setting markings The Brownells Lower Receiver is built with an interesting combination of methods. Brownells started with an aluminum build to imbue the receiver with a lighter-weight frame and to emulate the style of traditional military-style receivers. After the general mold is finished, the receiver is then machined to mil-spec dimensions to perfectly match the type of receiver used by traditional, issued M4 carbines. This receiver is military spec just like the first receiver we reviewed, although this more expensive version is lighter in weight and slightly more durable thanks to its more specialized aluminum construction at the beginning of the process. It’s still very close to the “real” thing and is designed for use with standard 5.56 rounds. A matte black finish allows it to fit into any carbine that’s going after the traditional military look, although it lacks the engravings that the previous model had for your firing mode. You’ll have to add those yourself. This receiver is very versatile and can work with a staggering number of M4 builds, including Models 618, 629, 630, and so on. Visit the site and see if your template is among the builds this receiver is good for; in terms of value for money, this receiver is hard to beat. Bottom Line The Brownells Lower Receiver is a great aluminum piece that’s made to military specs to imbue the receiver with durability and efficiency. It’s good for the common 5.56 rounds that most people will use in their M4 and is finished with a black matte coating. 3. PSA AR15 MOE EPT Lower Receiver CHECK LATEST PRICE Pros Can choose engravings Smoother trigger than mil-spec Can be used with many kinds of ammunition Cons A little pricey Here we have an aluminum-forged receiver that's built differently from the mil-spec models we've looked at so far. It can chamber many different kinds of rounds, depending on your upper receiver and the barrel that you install on the carbine . This makes it a great pick if you’re going to customize your build or are experienced enough to start making an M4 from scratch. The receiver has a smooth nickel finish that allows it to slot very easily into existing uppers. The trigger is a lot smoother than triggers you’ll find on military spec lowers that also come with a trigger. In addition, you can choose between two different engraving choices: safe/fire or a pictogram style that doesn’t rely on English. This can be handy if English isn’t your first language or if someone who doesn’t read English might be handling the weapon. Because of the greater focus on personalization and customization, this is a better pick for experienced M4 tinkerers instead of beginners. It is a bit expensive compared to some of the other receivers we’ve looked at, but you’ll find that it’s well worth the cost due to its lightweight build (from the aluminum forging) and durable construction. It’s a piece that’s designed to last and work with your original build rather than force you to conform. Bottom Line This receiver has a number of great features that make it ideal for more custom M4 templates, including the ability to work with many calibers of rounds, two engraving options, and a smooth nickel finish and smooth trigger. 4. Brownells BRN-4 Stripped Lower Receiver CHECK LATEST PRICE Pros Forged from Germany, great durability Anodized finish reduces corrosive damage over time Cons Expensive This receiver is made from a forging from Germany and is molded out of a different shape than the standard AR-15 model. Instead, it's forged from an HK416 shape and then machined to be as authentic to an AR-15 model as possible. The result is a bit of an amalgamation between the two receiver types that might find a home for M4 enthusiasts looking to switch up the look of their new rifle or experiment with different configurations. This means the receiver can be used for custom AR-15s or HK416s. It can’t be used with certain parts, like Surefire 60/100rd magazines, but so long as you check the site to make sure that your build doesn’t have any of the disallowed pieces you’ll be fine. The receiver has markings on the side to denote your firing setting in the style of the KH416 model, further melding the two types if you choose to use this receiver in your rifle’s build. The finish is anti-corrosive, so even if the weapon gets wet it won’t succumb to corrosion damage as quickly as receivers without is distinctive finish. There is a bit of a backup sometimes if a lot of orders come through and the receiver is worth a good chunk of cash, but in terms of high quality, you'll find nothing better. Ultimately, grab this receiver if the mixing of the AR-15 and HK416 styles appeals to you. Bottom Line This receiver is made from a forging for an HK416, then machined to work for an AR-15. This gives it a distinctive look and feel, as well as long-lasting durability. It’s pricey but worthwhile if this customization is something you like. 5. Aero Precision M4E1 Stripped Lower Receiver CHECK LATEST PRICE Pros Large triggerguard opening Although it’s stripped, comes with some extra pieces Cons Large insignia might not work for your rifle Finally, this receiver is forged from an extra-strong aluminum base that’s machined to look like a mil-spec model like the kinds at the beginning of our reviews. However, due to its custom shape, it’s much sleeker and smoother than a lot of military receivers and has slightly lower weight while still retaining great durability. It’s classified as “stripped”, but it actually retains a few extra pieces that don’t normally come in stripped lowers. These include an extra-wide triggerguard that gives your gloved fingers plenty of room to rest and maneuver without getting caught and an easy-install threaded bolt catch roll pin that can reduce your chances of harming the lower as you install it. It has a flared magwell opening for quickly swapping magazines . The receiver will work with most mil-spec AR components, so customization options are pretty versatile so long as the general build follows a spec that’s close to military standard. It’s also great for combining with pistol grips and other modifications. The black finish is anodized to resist wear and corrosion, furthering the receiver’s lifespan. You get all of this functionality for a really affordable price, too. This is a great option if you’re into customization but don’t want to get too crazy with it and like the general outline of mil-spec receivers. There is a large “A” engraved on the receiver that might not suit your style, but you can always paint over it if you like. Bottom Line This receiver is a top-of-the-line model that is machined from a custom aluminum forging and machined to match military-spec builds. It’s combinable with most standard mil-spec components and has an anodized finish to reduce wear and tear. Furthermore, it comes with a very wide triggerguard despite being stripped, as well as a flared magwell for fast magazine swapping. Conclusion With this guide, you should have everything you need to complete your carbine build and get a great M4 out of your effort. There’s a good lower receiver for anyone and any type of rifle, from standard military-spec models to custom builds that are the envies of gunsmiths. Check out some of our other guides for other advice when building or repairing your M4 carbine.

[Review] IWI Tavor X95: Bullpup Goodness

[Review] IWI Tavor X95: Bullpup Goodness

Trending: Best Places to Buy Ammo Online and [Buyer's Guide] 7 Best AR-15s While the AR-15 is the king of the combat carbine world, there are other options on the market. Have you ever been looking at a new AR-15 but they all seem too similar and you feel the itch to try something new? Other times, you may even want an extra short rifle without going through a lot of paperwork for a Short Barrel Rifle (SBR). IWI Tavor X95 If this is the case, you may be interested in looking into the Tavor X95 by IWI. I am certain you will love with the Tavor X95, especially since it is nothing like your standard AR-15 being a bullpup style rifle with an overall length shorter than most SBRs. In this article we will go over all the features of the Tavor that will help spice it up during your next visit to the range. Let’s take a look! IWI Tavor X95 1750 at Kentucky Gun Co. Prices accurate at time of writing View Details 1750 at Kentucky Gun Co. Compare prices (2 found) Kentucky Gun Co. (See Price) Rainier Arms (See Price) Prices accurate at time of writing Table of Contents Loading... Where It Came From The Tavor has been out for a while but about 10 years ago it was selected by the Israeli Defense Forces (IDF) to replace their issued M16 rifle and M4 carbine. There were two main reasons why the IDF wanted to replace their aging M16A1/A2 rifles and M4A1 carbines. The first was to adopt a more modern, durable and easy to maintain weapon. Secondly, was to have a rifle suited for close-quarters while keeping the benefits of a full-length rifle. I took the Tavor X95 to the range and fired at least 500 rounds down the pipe in one trip and I was surprised that there was not a single issue, it did exactly what it was supposed to do. Tavor Shouldered and shooting Basic Specs Caliber: 5.56 NATO, 300 Blackout and 9mm Action: Semi-Auto Operating System: Closed rotating bolt, long stroke gas piston Magazine: AR-15 style magazine Barrel Material: Chrome lined, Cold hammer forged, CrMoV Barrel Length: 16.5” Overall Length: 26.125” Weight: 7.9 lbs. Rifling: 1:7 inch twist, 6 grooves, Right hand Sights: Folding front sight (blade) with Tritium insert and rear sight Range Report A day at the range is always good, and the Tavor is definitely a blast to shoot. Recoil was almost nonexistent and it felt super comfortable to shoot. Several hundred rounds later and I did not see a single malfunction throughout my experience with the Tavor. I started shooting at 100 yards and I hit the target without a problem, I then moved closer to have some fun. Everything was just fine while shooting but I realized that you need to get really low and close to your body to be able to aim properly. Tavor Rear View I noticed that I could not aim as fast as I did with my AR. This might be solved with a higher mounted optic. Reloads were definitely a problem. Compared to an AR, I felt very slow. Sure, practice makes perfect and all, but I did not do that before taking this guy to the range. For me, it did not feel as natural because I have only practiced a little in the AR platform and there is definitely a learning curve when switching to a bullpup style rifle. I also realized that some magazines didn’t fall free every time after pressing the magazine release, therefore, I had to strip some magazines when doing some of those “fast” reloads. Best Magazine Magpul 30 Round PMAG Gen M3 .223/5.56 Magazine 12 at Gun Mag Warehouse Prices accurate at time of writing View Details 12 at Gun Mag Warehouse Compare prices (3 found) Gun Mag Warehouse (See Price) Brownells (See Price) Rainier Arms (See Price) Prices accurate at time of writing The charging handle was very easy to access and you don’t have to break your grip when doing this. Ambi controls is normally a weak point on a bullpup rifle, but this ambidextrous charging handle was great for lefties. It is also a non-reciprocating charging handle — meaning that the charging handle is not going to hunt your fingers of your support hand when shooting the rifle. Tavor Charging Handle While technically a fully ambidextrous rifle, the charging handle does need to be switched from left to right for left-handed shooters. This is easy to do, but not exactly something you should be doing in the field. Otherwise, the Tavor features an ambi fire selector, ambi magazine release and a bolt release all the way in the back of the riffle accessible for righties and lefties. To me, the bolt release is in a very awkward spot. But this could be another training issue that I just need to get used to. Size and Capacity The Tavor X95 sets itself apart with the bullpup design because of its compact size while having a 16-inch barrel. If you compare it with the overall length of an AR-15 with the stock collapsed and a barrel of 16.5 inches, that is about 32 inches. The Tavor has an overall length of just 26 inches. Tavor X95 Vs. Daniel Defense AR-15 You may also opt for the Tavor X95 since getting an SBR cost a lot of time and money on top of the normal cost of the rifle. If you decide to get a SBR or AR pistol, you will decrease the bullet velocity while at the same time increasing muzzle blast, meaning that you are going to be that annoying guy at the indoor range. For being a modern 5.56 rifle, the Tavor X95 is a bit heavy weighing in at 7.8 pounds. Compared to most ARs at about 6-7 pounds. Shooting the Tavor the weight doesn’t feel bad since it is a well-balanced rifle. The extra weight also helps soak up recoil a bit making it smooth and easy to shoot. Long Stroke Gas Piston The Tavor uses the long stroke gas piston system and this is the system that you find in the M1 Garand and AK-47. This system will add some weight to the design and this might be the reason why the Tavor is almost 8 pounds. But the benefit of having a long stroke gas piston is extreme reliability even over long periods of time and with little cleaning. Tavor BCG and gas system Stock The stock is made of a hard, strong plastic that feels solid when you pick up the Tavor. If you buy this rifle brand new, it comes with two swivels so you can get your sling and use it right away. Best Two-Point Sling Viking Tactics (VTAC) Sling 43 at Amazon Prices accurate at time of writing View Details 43 at Amazon Compare prices (2 found) Amazon (See Price) Brownells (See Price) Prices accurate at time of writing Field stripping the Tavor is a breeze, no tools or anything like that required. In a very H&K G3 feeling way, you have three pins that are holding everything together. The first pin — you will push out and it will allow you to take the bolt out. Tavor Magazine Release and sling swivel studs The other two pins will allow you to take out the trigger assembly. And yes, it is this easy to gut the Tavor. Other models in the Tavor family have a smaller buttstock made out of steel instead of rubber. However, I prefer the rubber buttstock since it is giving enough length to hold the rifle comfortably. I feel that if it were to be a little bit shorter, it would be harder to shoot the rifle. Handguard The top of the rifle has a Picatinny rail where you can attach your optics and any other accessories that you might need. A neat feature that you might not notice is that you have hidden integrated iron sights in the Picatinny rail. Tavor Rear Sight folded You have three panels that come with the Tavor, and if you take them out, you can expose the Picatinny rails on the 3, 6 and 9 position for more accessories. I went with adding a Magpul vertical grip. Magpul RVG Vertical Grip (Picatinny) 23 at Optics Planet Prices accurate at time of writing View Details 23 at Optics Planet Compare prices (2 found) Optics Planet (See Price) Brownells (See Price) Prices accurate at time of writing Tavor Front Sight The panel at the 6 o’clock position includes a hand stopper to prevent your hand to slip and to be in the front of the muzzle. Another nod to ease of disassembly, you do not need a tool to remove or install these panels, you can just push the lever that is integrated into the panels and slide them right off. Grip In my opinion, the grip seemed a little weird. It may not be my favorite but isn’t my least favorite either. I wish the trigger guard only covered the entire area of the trigger, like on an AR. With the whole-hand-guard system the Tavor has when I run and shoot with the Tavor, my hand seemed to slide up the pistol grip. Then, when I wanted to pull the trigger and shoot I had to adjust my grip again. Tavor grip area IWI offers a kit where you can change the pistol gri p system so if this bothers you as much as it bothers me, you can buy that kit and fix this issue. Optics When using the Tavor throughout this testing period I used the Burris 3X Prism Scope. Burris 3x Prism Sight 349 at Amazon Prices accurate at time of writing View Details 349 at Amazon Compare prices (3 found) Amazon (See Price) Palmetto State Armory (See Price) Optics Planet (See Price) Prices accurate at time of writing At 100-yards standing I was hitting the target no problem. Given that this is a 3X magnification scope, this is not the best scope for close-quarter combat or home defense. Even though I mentioned that this rifle is super compact and has all the capabilities of a full-size rifle if you needed to, I would recommend mounting something smaller such a regular red dot. Tavor Side view I also tried a Sig Sauer Romeo 5 and I have to tell you this is where all the fun is at. It is a blast mounting that small red dot and fire away. Brutally Tested Budget Red Dot Sig Sauer Romeo5 149 at "Palmetto State Armory" Prices accurate at time of writing View Details 149 at Palmetto State Armory Compare prices (3 found) Palmetto State Armory (See Price) Optics Planet (See Price) Amazon (See Price) Prices accurate at time of writing I truly believe that a red dot is the best option due to the speed of sighting and easy of use. We also have some iron sights in the Picatinny rail and they are surprisingly decent! I would still recommend a proper optic, but it’s good to know that you have the backup option if you ever need it. Tavor sights These are flip-up iron sights integrated into the Picatinny rail, therefore, you will always have them and these aren’t going to take any space from you. The downside though is that if you have any accessories mounted on top where the iron sights are supposed to be you are going to have to detach all these accessories before using the iron sights. And depending on which situation do you find yourself this can be a real issue. Check more of our favorite optics in Best AR-15 Optics: 1x and Magnified . A Couple AR-15 Optics Price The price is a little high but you are getting one hell of a rifle. Just imagine having a full AR15 in a different configuration with the size of an AR pistol or SBR without having to go through the entire process to get one. IWI Tavor X95 1750 at Kentucky Gun Co. Prices accurate at time of writing View Details 1750 at Kentucky Gun Co. Compare prices (2 found) Kentucky Gun Co. (See Price) Rainier Arms (See Price) Prices accurate at time of writing That alone might be worth it for some people. By The Numbers Reliability: 5/5 After nearly 1,000 rounds total, the Tavor did not give me any reliability issues. Taking a look at other higher round count reports, the durability is as solid as it gets. Best .223 Bang-for-the-Buck Wolf Gold .223 55 gr 7.40 at Lucky Gunner Prices accurate at time of writing View Details 7.40 at Lucky Gunner Compare prices (2 found) Lucky Gunner (See Price) Brownells (See Price) Prices accurate at time of writing Accuracy: 4/5 You cannot pretend that the Tavor is a sniper rifle or a long range beast, but for its role and caliber, it is on target at reasonable ranges. I didn’t MOA test it since I know that the rifle will outshoot me, and for a fighting rifle that is really all that matters. Ergonomics: 3.5/5 I believe this is a more objective opinion since some people would prefer the ergonomics of an AR-15 style rifle or some people might love how small and compact the Tavor is. The ergonomics were okay to me and I feel that if I practice more with this rifle I would get more comfortable and more proficient. However, it is something that will require extra training. Looks: 5/5 I loved the looks of the Tavor. I think this rifle has a unique look to it and IWI did a great job to make it look super cool. Customization: 4.5/5 Customization for the Tavor is a plus. Very similar to the AR 15 platform you could add as many accessories as you want. With Picatinny rail in all of the right places, it’s easy to adjust and configure the rifle as needed. Editor's Pick SureFire M600 240 at Amazon Prices accurate at time of writing View Details 240 at Amazon Compare prices (3 found) Amazon (See Price) Brownells (See Price) OpticsPlanet (See Price) Prices accurate at time of writing You also have all those integrated QD attachments for your sling in the stock of the rifle. That does bring us to the grip though. If there is one drawback to customizing the Tavor, it would be the grip. If you are looking for a pistol grip that will provide you with a full trigger guard you might have trouble finding this grip since it is out of stock quite often. Bang for the Buck/Value: 4/5 With an MSRP of just under $2,000, the Tavor isn’t a cheap plinker. I am still rating the Tavor in this category pretty high because you actually get quite a gun for that price. Good ergonomics, the size, reliability, and other features make the Tavor worth the dollars in every way. Overall Rating: 4/5 Parting Shots The IWI Tavor X95 gives you a shorter package than some SBRs. The bullpup form factor gives you a full 16-inch barrel but the ergonomics might not be for everyone. However, customization and looks are stellar. You’re going to get some head-turns at the range. I would consider the Tavor to be one of the higher-end rifles that can give a fight to any big-name AR. Tavor Side view But since it is a different form factor, you will need to practice with this riffle and get familiar with it. I would highly encourage you to try the Tavor X95 either by shooting with a friend, finding a range that will let you rent it out, or just go ahead and buy one. IWI Tavor X95 1750 at Kentucky Gun Co. Prices accurate at time of writing View Details 1750 at Kentucky Gun Co. Compare prices (2 found) Kentucky Gun Co. (See Price) Rainier Arms (See Price) Prices accurate at time of writing I truly believe that this is a rifle worth including in anyone’s collection. If you want to see more of the Tavor, take a look at my video review ! What do you think about bullpup rifles? Is it the wave of the future or a fad that’s almost dead? Let us know in the comments! For another awesome bullpup, take a look at our hands-on review of the Steyr AUG !

How to Refinish USGI Magazines

How to Refinish USGI Magazines

I am sure that some of you may recall that the process of refinishing USGI magazines was quite popular during the Clinton AWB/Magazine ban in the 1990’s. Even if it is not as popular now, it is still a fun and easy project to do on a day off from work. When I refinished my magazines, I also upgraded each of them with Magpul anti-tilt followers and Magpul Ranger floor plates . For me, this allows for better functionality and also gives my magazines more of a modern appearance. Please keep in mind that there are many different ways to refinish your own USGI magazines, and this guide explains how I chose to refinish mine. I elected to use the mil-spec coating known as Perma Slik G . It is not paint, but actually a dry-film lubricant and is the same coating that the magazines would have had coming out of the factory as new. With that said, let’s get started. Items needed – USGI magazines – Water – Cleaner/degreaser (I used Simple Green ) – Tooth brush and steel wool – A way to hang the magazines while spraying them (I used wire coat hangers) – A bullet tip, or other small tool to help with removal of the magazine floor plate – Perma Slik G dry film lubricant Disassembly and cleaning You will need to disassemble your USGI magazines by sliding off the floor plate and removing the spring and follower. Using a bullet tip or other small tool, slightly pry up the floor plate until the indent clears the edge of the magazine. Once that’s done, the floor plate will slide right off. This will allow you to fully clean and degrease the entire magazine inside and out. Most importantly, as with any paint or coating application, surface preparation is the key to a successful refinish. You will need to remove all the dirt, grime, and oils from the magazines. This is the only way to effectively get your new coating to adhere properly. Proper cleaning and degreasing is important when refinishing these magazines. I chose to take a large plastic container, fill it with hot water, and pour in some Simple Green. Make note that Simple Green is known to affect aluminum differently than other metals and materials, but as long as you do not soak them for an extended period of time (more than 10 minutes), and thoroughly rinse them in clean water, you will not have any issues. For the most part, I used a toothbrush to scrub the inside of the magazines and then used the steel wool to scrub the outside. I found this to be the quickest and easiest way of removing all of the dirt from the magazines. I spent roughly 3 minutes scrubbing each magazine. After you have finished scrubbing them, rinse them off in clean water and set them on a paper towel to dry. If you are impatient like me, feel free to wrap the magazines in a paper towel and throw them in the oven for 30-40 minutes on the low setting. This will make sure they are nice and dry for the next step. A fresh new coat This is my favorite part of the whole process since it brings the magazines back to life. I also recommend going outdoors for this step as the fumes can be hazardous if there is not enough proper ventilation. I hung the magazines up by wire coat hangers so I could spray them with their new coat of Perma Slik G. I freely hung my magazines from wire coat hangers on a saw horse type structure. Make sure to keep some space in between each magazine so that they do not touch each other. Using Perma Slik G, I sprayed each magazine evenly from approximately 12 inches away. This assisted with making sure I did not apply thick coats. I ended up spraying a total of 2 coats on my magazines while waiting an hour in between coats. I elected to follow the directions on the Perma Slik G can and allowed all of my magazines to air dry for a few hours. Per the directions on the can: “items can be handled after 1 to 6 hours and will be completely cured in 24 hours.” I would say it took about 3 hours until mine felt dry enough to handle. After I brought them inside and installed the Magpul anti tilt followers, springs, and Magpul Ranger floor plates, I let them sit overnight. Ready for the range To assure proper function, go through and insert each unloaded magazine into your rifle and make sure that the magazine seats correctly. Then, operate the magazine release button and confirm that each magazine falls freely. Now you are ready to load them up and head to the range. A freshly refinished USGI magazine. Have you ever refinished any USGI magazines? If you have, share your experience with me.

Book Review: Adrift, Seventy Six Days Lost at Sea

Adrift is not your typical book review that you will find @ Survival Cache .  Most of the books we review here are written by people who have researched survival and prepping and tested themselves up to a certain point. Adrift is a true story written by Steve Callahan , who was somewhat of a survivalist but had no formal training in survival.  He was thrown into a situation where he had to rely on his Survival IQ and the gear he was able to grab as his small sail boat sank in the middle of the Atlantic Ocean.  The event took place back in 1982 but the lessons for every survivalist & prepper are as real today as they were back then.  Even if you have no interest in sailing or boating you still can appreciate what this man went through for 76 days lost at sea . The book starts out with his dedication – “This book is dedicated to people everywhere who know, have known, or will know suffering, desperation, or loneliness. Quick Navigation Quick overview Lessons to be learned: Quick overview Steve is an avid sailor who has taken to designing and building boats.  He decides to take a break from this work and design and build his own boat to do more adventurous sailing.  He sails his new boat from Maryland over to England to enter a sailing race that stretches from the UK to the Caribbean.  That race ends badly for him and he is forced to make repairs in Spain.  He then leaves Spain and sets out for the Caribbean again, solo.  A few days into his trip he encounters a terrible storm.  He goes to sleep that night only to wake up as his boat is being smashed apart in the middle of the Atlantic Ocean.  He only has seconds to grab what he can before the boat sinks into the black icy waters (consider what you might grab in a situation like this whether on a boat, in your home, car, etc., do you have your Bug Out Bag ready to go?). He somehow manages to inflate his survival raft and grab a sleeping bag and an emergency/survival bag he personally prepped.  His raft is equipped with an additional small survival bag but it turns out to be mostly junk.  Luckily, Steve’s self-prepped Bug Out Bag is full of goodies including a small spear gun that saves his life (I think I need to get one of these).  For the next 76 days he battles sharks, weather, thirst, hunger, and his own mind while floating in a 6 ft rubber raft in the middle of the Atlantic Ocean.  Oh, did I mention that he is naked the whole time?  Yes, in the middle of the night when his boat went down, old Steve was sleeping in the buff and stayed like that for 76 days (I wonder if he had sunscreen in his Bug Out Bag ). Lessons to be learned: 1.  Get packed and be ready. Luckily for Steve his Bug Out Bag was packed and he was able to grab it before he headed down to Davey Jones’ Locker . 2.  Spread Load. Steve did not just rely on the emergency products that came with the life raft.  He spread loaded some of the same items in his Bug Out Bag and it saved him.  For example, the fishing kit provided in the small emergency bag on the life raft turned out to be good for two things…Jack and Sh*t.  Luckily for Steve he had packed other fishing tools in his Bug Out Bag.  One of my favorite sayings is “If you buy cheap…you buy twice.” In a survival situation you can’t afford to have cheap stuff that does not work.  Test your gear then test it again. 3.  Estimate how much food and water you will need in an emergency situation….then multiple that by 8. Steve had food and water….but only about 10 days worth, he was out there for 76.  There are a lot of Survivalist & Preppers who spend the majority of their survival budget on guns & ammo, make sure you have adequate food & fresh water as well.  Steve had to devote the majority of his energy to catching food and making fresh water.  This almost killed him in the end. 4.  Get a good Survival Book. Steve happened to pick a survival book on sale a few years before his accident, in his words “It’s worth a king’s ransom to me now.”  Check out our list of survival books , get one….someday it might be worth a king’s ransom to you and your family. 5.  Don’t rely on governments or other people for your survival. Steve had a EPIRB (Emergency Beacon), a Flare Gun, and a Radar Reflector.  None of which worked out for him as he watched several boats sail right past him.  Steve also had a family who knew his planned route and notified the Coast Guard when he was overdue.  This also failed and the Coast Guard declared that he was most likely dead.  Please take note all of the survivalists who think “I just need a mirror and magnifying glass to survive anything.” 6.  Have a back up of all of your critical gear. Steve was extremely lucky and had several key back ups.  He had two solar stills to make fresh water, one of which broke within the first few days, and he had two survival knives and a back up fishing method which saved his life.  There’s another great saying, that’s been repeated over and over to me through the years, and that is: when it comes to critical gear… “two is one and one is none”. All in all it was a good book .  I enjoyed reading it and would recommend it as something worth checking out to get yourself in the survival mindset.  Steve Callahan had an incredible Survival IQ and “Will to Survive”.  Several times during the book he had to use critical thinking to come up with fixes to dire situations using only the tools he had aboard his 6 foot life raft.  MacGyver would be proud. You might also like “6 Dangerous Urban Myths About Water” Photos from: Steve Callahan & Houghton Mifflin Company Raymond Olascoago www.sailfinalstraw.com www.howstuffworks.com Other interesting articles: Book Review: The Modern Survival Manual: Surviving the Economic Collapse Book Review: Lights Out LDS Preparedness Manual: Book Review for 2020 Book Review: Air Rifles: A Buyer’s and Shooter’s Guide

Qore Performance announces Enhanced Dealer Program with launch partner SOARescue

Qore Performance, inventors of the IcePlate hard cell cooling and hydration solution, is proud to announce the release of the Enhanced Dealer Program in partnership with SOARescue who is now the Subject Matter Expert for all Fire/Rescue, EMS and Tactical EMS applications for the IcePlate. In this role, SOARescue will be spearheading the already rapid growth of IcePlate into Fire/Rescue, EMS and Tactical EMS applications where end users are in need of a powerful, portable rehab solution. The expansion of IcePlate applications beyond military and law enforcement has been a vision of SOARescue for some time. “Environmental injury prevention and mitigation is often overlooked in our community. This has partially been due to inadequate equipment and education on the subject. We are incredibly excited about this partnership with Qore Performance, and the opportunity to close a capability gap” says Andrew Rowley, CEO of SOARescue. The IcePlate will be able to be utilized in many facets of Fire/Rescue and Tactical EMS operations. “We foresee this being an incredible tool in firefighter rehabilitation after a working fire or prolonged extrication. This tool will be utilized under technical rescue gear keeping rescuers cool or warm regardless of the environmental condition(s). The multifunctional design of this amazing device will also allow for tactical medics and operators alike to remain cool and hydrated on extended operations, enhancing their own safety and performance in the process, without expanding the footprint of their kit,” concluded Rowley. The key to packing all of this capability into small, deployable spaces is the combination of IcePlates and Pelican Coolers. The IcePlate is geometrically optimized for Pelican Coolers and delivers 30% greater storage density over bottled water. SOARescue will use this unique and groundbreaking IcePlate capability to help Fire Rescue EMS personnel bring more relief in less space – an efficiency that will make a difference on rigs already loaded with kit. Additionally, SOARescue is the first Authorized Service Center for IcePlate. As an IcePlate ASC, SOARescue will be able to offer current IcePlate customers the ability to retrofit their existing IcePlates with Qore Performance’s cross-compatible Quick Disconnect, which allows users to connect their existing Source Hydration hoses and some CamelBak hoses to their IcePlate. “We are excited about our partnership with SOARescue. They are the type of visionary, high-quality, high character subject matter experts with whom we love to partner,” says Justin Li, Inventor & Owner of Qore Performance, “we couldn’t ask for a better launch partner for our "Enhanced Dealer Program" .” The Enhanced Dealer Program capabilities are available from SOARescue immediately. SOARescue stocks IcePlate in all colors and combinations (White/Clear, Desert Tan and Wolf Grey, with or without the cross-compatible Quick Disconnect). If you are in the Fire Rescue EMS space and are interested in finding out how SOARescue can build an IcePlate program for your department, contact: IcePlate@SOARescue.com , visit www.SOARescue.com , or call 1-855-4-SOARESQ and use option 2. Qore Performance IcePlate Fire/Rescue EMS Rehab by SOARescue Full IcePlate Product Line

Summary

We decided to take a lighter look TEOTWAWKI with a Survival Cache original,  Murphy’s Laws of TEOTWAWKI.   If you know Murphy then you know, if it can happen…. .